We provide our Civil Infrastructure Standard Drawings to be viewed or downloaded for contractor use.
Please refer to the Infrastructure Design Manual before using these drawings. The City of Greater Geelong has also produced several Design Notes which provide additional information and amended requirements to the IDM Standard Drawings. It is recommended to read the Design Notes prior to downloading any standard drawings.
All the drawings are published on this site in Adobe PDF format. These files can be opened, viewed and printed by anyone with Adobe Acrobat Reader 5.0 or later.
It will be a contractor's responsibility to obtain and maintain up-to-date copies of the standard drawings.
These Standard Drawings and Design Notes will be updated from time to time as required, without prior notice. It will be the responsibility of interested parties to regularly check this update history and download any revised standard drawings to keep their master copies of these documents current.
We will not be responsible for any loss or penalty incurred by any party who has failed to maintain up to date copies of these documents.
Note: The Civil Infrastructure (Standard) Drawings that are shaded grey in this table have been superceded and should no longer be used. Using the link will take you to the Infrastructure Design Manual webpage and the current applicable Standard Drawings.
Disclaimer and Copyright
These standard drawings are the property of City of Greater Geelong, which is a Local Government Authority in Victoria, Australia. It contains information, documents, pages and images prepared by the City of Greater Geelong. While the information contained in this website has been formulated with all due care, the City of Greater Geelong does not warrant or represent that the information is free from errors or omission, or that it is exhaustive. Users of the standard drawings will be responsible for making their own assessment of the information and should verify all relevant representations, statements and information. If you're concerned about any issue raised by the material then you should seek your own professional advice.
The information is made available on the understanding that the City of Greater Geelong and its employees and agents shall have no liability (including but not limited to liability by reason of negligence) to the users for any loss, damage, cost or expense incurred or arising by reason of any person using or relying on the information and whether caused by any error, omission or misrepresentation in the information or otherwise. While the information is considered to be true and correct at the date of publication, changes in circumstances after the time of publication may affect the accuracy of the information. The information may change without notice and the City of Greater Geelong is not in any way liable for the accuracy of any information printed and stored by a user.
The information provided in each of the drawings sets out guidelines for the selection of design standards and practices for construction works.
Should further information be required please contact the Administrative Officer Engineering Services on 03 5272 5272 or refer to the feedback section below.
Related information
Page last updated:
We are glad that you find this page helpful!
Submitting feedback... Please wait.
An error occured! Please try again.
Feedback submitted successfully!
Thank you for your feedback. We value your input and will use it to improve our services.