Drinking Fountain - Code - TBC

Use

Drinking fountains are to be located in high use streets and focussed around key public spaces and facilities including; parks transport nodes and civic buildings throughout Central Geelong.

Installation

• Install fountain in location with adequate water supply and proximity to drainage point. Always connect to plumbed drainage point
• Separate base plate fixed down to slab or footing with valve and armeture as detailed in City of Greater Geelong Furniture Suite drawings
• Inbuilt drainage grate and sump connected to plumbed drainage point
• Minimum 600mm off set to all carriageways and other furniture
• Ensure wheelchair access clearance is achieved to all sides to AS1428.1 (2009)
• Install out of main thoroughfares and not abutting into dominant travel paths
• Install with shut - off valve inside fountain as - detailed
• Install external shut - off valve in nearby pit
• Include footing for fountain and drainage sump

Material

Body 316 stainless steel no.4 finish Stainless steel fasteners and all internal hoses and other accessories

2 part bubbler & button

Dimension (nom.)

450(L) x 175(W) x 800 (H)

Option

Where adjacent garden bed and with falls to bed fountain may be installed without sump and grate. Face rear of drinking fountain to garden bed.